Flexible polymer pre-insulated CORDFLEX pipe | POLYMERTEPLO Group LLC

FLEXIBLE POLYMER PRE-INSULATED CORDFLEX PIPE IS AN INNOVATIVE SOLUTION FOR MODERNIZING HEATING NETWORKS

For 10 years, the company has been developing and testing pipes with a maximum operating temperature of up to 130 °C and an operating pressure of up to 1.6 MPa.

The new pipe was named KORDFLEX and became a logical continuation of the line of flexible pre-insulated pipes in the product portfolio of the POLYMERTEPLO Group, which will close the need for such solutions both in the primary circuit of heat supply systems with CTP, and to carry out the construction and reconstruction of networks using ITP.

To increase the energy efficiency of the pipeline, the latest generation foaming agent is used in the thermal insulation layer, which will reduce heat losses during high-temperature operation.

advantages

1. Contributing to the reduction of construction time

   • The speed of pipeline laying is 5-10 times higher due to the long and flexible pipe sections.

   • A team of 4 people can lay up to 700 m of pipeline per shift.

   • Reducing the number of butt joints

   • The amount of excavation work is 3-10 times less

2. Improving the quality and safety of the facility

   • They are not susceptible to corrosion

   • They are not susceptible to the formation of deposits inside the pipe

   • Improving pipeline reliability by reducing the number of butt joints

3. Economic effect at the stages of construction and operation of the facility
   • They are not susceptible to corrosion
   • They are not susceptible to the formation of deposits inside the pipe
   • Improving pipeline reliability by reducing the number of butt joints
4. The possibility of localization of production and/or construction
   • The presence of an official representative office of Polyplastic UralSib trading house in the region
5. Reducing the carbon footprint of the facility
   • No welding work during pipeline installation

THE UNIQUENESS OF THE CORDFLEX PIPE IS THE ONLY TECHNICAL SOLUTION THAT HAS NO ANALOGUES. FLEXIBLE POLYMER PIPE THERMALLY INSULATED WITH POLYURETHANE FOAM FOR USE IN HEATING NETWORKS, WITHSTANDING A TEMPERATURE REGIME OF 130C AND A PRESSURE OF 1.6 MPA

Currently, steel pipes are used as the basis of the applied technologies (they are subject to corrosion), and other thermally insulated polymer pipes are not designed for operation at 130 ° C and a service life of 50 years.